Tech

[Solved] Page Fault in Nonpaged Area error in Windows 10

One of the common errors that Windows 10 users can face is the Page Fault in Nonpaged Area error. The cause for this issue can be when Windows is unable to find a file in its memory which it expects to find. If the error becomes a recurring occurrence, then it can result in the Blue Screen of Death.

For most people, it can be difficult to get around this issue. Although it is difficult, it is not impossible. If you follow the simple steps given below, you can solve this issue quickly. There are different reasons that can lead to the Page Fault in Nonpaged Area error.

These reasons can be the hardware or the software and so on. To solve this issue, you don’t have to be a specialist or anything. This problem can be solved easily with just the basic concepts.

What is the solution for the Page Fault in Nonpaged Area?

The first step in resolving this issue is to restart the Windows. If you can’t restart your PC, you can start it in safe mode instead. Once you have restarted the system and have logged in to your Windows, then you can try any of the below-mentioned solutions to resolve the problem. While the usual error will result in some random blue screen of death crashes, your system will respond and you will still be able to use it.

Thus, you can use the solutions given below to resolve the Page Fault in Nonpaged Area error.

Solution One: Revert back your recently made changes

In most cases, these issues are caused by hardware or software. So, first of all, if you have any newly installed software or any newly connected hardware, remove it as it can be the potential cause for the error.

Once you have removed the suspected hardware or software, then your system should not remain affected.

After you have done this, check and see if the BSOD still appears and your problem still persists. If it is not, try any of the other solutions given below.

Solution Two: Perform a Disk and Memory Check

Another possible reason for the Page Fault in Nonpaged Area can be erroneous RAMs. If you have tried solution one and it doesn’t work, then chances are that the problem is in your RAM.

To resolve this issue, you need to perform a disk check. If you don’t know how to do so, then follow these simple steps:

  1. Boot up your PC and open up the Search Box by either clicking on it or pressing Windows + S.

  2. Type in ‘cmd’.

    image

  3. You will see the ‘Command Prompt’, Right-click on it, and run it as administrator.

  4. Once it is open, type in ‘chkdsk /f /r’ and press any key.

    image

  5. Then press the Y key on your keyboard.

    image

  6. Now, you have to open up the Run Command Prompt by pressing Windows Key and R. Type in ‘mdsched.exe’.

    image

  7. Go for the the ‘Restart Now and Check for problems (recommended)’ button. Your computer will then restart.

    image

  8. Wait till the scan completes. This will take around 15 to 20 minutes.

See if you are still facing the issue. If you are, try the below solutions to solve the Page Fault in Nonpaged Area error.

Solution Three: Turn off the Automatic Paging File Size management

If you are still facing the issue despite facing the two issues, then there could be another reason for the problem. Try the below method to see if you resolve it or not.

  1. First, open the file explorer by pressing Windows Key + E

  2. Press right-click on This PC and select Properties

  3. Choose Advanced System Settings

  4. From there, make your way to Performance Section. Then choose Settings.

  5. Choose the Advanced Tab and click on Change

  6. Deselect the ‘Automatically Manage Paging File Size for all Drives’ and press OK to save your changes

  7. Reboot your system. Make sure the problem is gone. If not, try these solutions given below

Solution Four: Turn off your third-party Antivirus for a while

Another reason behind the Page Fault in Nonpaged Area error can be the third-party antivirus you are using.

In this method, all you have to do is turn off your antivirus temporarily. If the problem is gone, then you should know that your anti-virus is the problem. And if the problem stays the same and nothing changes, then you should turn your antivirus back on.

If the former case happens and you see that the problem goes away when you turn your antivirus off, then you should keep it like that. Furthermore, contact your vendor and ask them regarding the issue.

You can also resort to another antivirus software. But, while your antivirus is off, you should be careful about your online activity. You should enable a different antivirus if you want to turn off your previous one permanently. This should help clear up the Page Fault in Nonpaged Area.

Solution Five: Update your drivers

It is commonly seen that outdated drivers are the cause of many computer-related issues. If you have tried all the above mentioned methods and nothing works, then the last case is to update the drivers.

The first step in doing this is determining which driver is causing the problem. Follow these simple steps to do this procedure

  1. Go to ‘Settings’ and then go to ‘Update and Security’.
  2. Select the ‘Check Updates’ option and wait for it to finish
  3. Then go to Control Panel, then the Hardware and Sound menu, and then go to Device Manager
  4. In this menu, you will see the faulty driver with a yellow symbol in front. The problem could also be in your audio drivers, your third-party webcam, or some other drivers so check them as well
  5. Reboot your computer and see if the method works.

Conclusion

These were the methods for solving the Page Fault in Nonpaged Area. To solve this problem, you don’t have to be some sort of expert. Any layman with basic knowledge can fix this issue by following the above methods.

The Blue Screen of Death error can be exasperating. If you find that no above method is working, then reset your RAM. That may fix the issue.